FIAT Punto - Manual (Page 197)

196
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
❒ Install the spare wheel matching the holes (F) with the corresponding
pin (G);
❒ Using the wrench provided, fully tighten the four fastening bolts;
❒ Work the jack handle to lower the car and remove the jack;
❒ Using the wrench provided, tighten up the wheel bolts in a criss-cross
fashion following the sequence shown.
IMPORTANT Do not fit the wheel cap to the space-saver wheel.
IMPORTANT You will need to change the set of bolts if you want to
change the type of wheels fitted (alloy rims instead of steel rims, and vice
versa); have this operation performed by skilled personnel. You should
keep the bolts and spare wheel in case you decide to use the original
type of wheel later on.
80
F0I0114m
F0I0115m
189-224 Punto GB 27-05-2009 11:59 Pagina 196