FIAT Punto 2012 User Manual

Page 228

Advertising
background image

F0U0291m

fig. 212

SPRAY NOZZLES

Windscreen washer fig. 213

If the jet is not coming out, firstly check that there is flu-
id in the reservoir (see “Checking levels” in this section).

Then check that the nozzle holes are not clogged; use
a needle to unblock them if necessary.

226

F0U0290m

fig. 211

Replacing the windscreen wiper blades fig. 211

How to remove the blade:

❒ lift the arm A off the windscreen;

❒ turn blade B 90° around pin C, located at the end of the

wiper arm;

❒ remove the blade from the pin C.
How to insert the blade:

❒ fit pin C into the hole located in the middle of the

blade B;

❒ refit the arm with the blade on the windscreen.

Changing the rear window wiper blade fig. 212

Proceed as follows:

❒ raise the cover A and remove the arm from the car,

slackening the nut B that fastens it to the pivot pin;

❒ fit the new arm, positioning it correctly, and fully tight-

en the nut;

❒ lower the cover.

KNOWING

YOUR

VEHICLE

SAFETY

STARTING

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

SERVICING

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

207-230 PUNTO EASY_LOUNGE GB 1ed 27-09-2011 8:58 Pagina 226

Advertising