ONYX BOOX A62 - Manual (Page 37)

37 / 37
Firmware Update
You can update the firmware by follow steps:
• Download the latest update package from Onyx website:
www.onyx-boox.ru
• Save the update package in a SD card.
• Make sure the update package is located at the root directory of the SD
card. No unzip is needed for this model of device. Just leave the name of
update package as it is.
• Insert the SD card into device.
• Restart device, press and hold the OK button. NOTE, the OK button
should be pressed before the device restarts. Hold it until you see the
message ‘Software update request detected, checking updates…’
Device updates itself automatically. It restarts after update finishes.
Note: Make sure device has enough power to finish the software update (at
least 2 grids displayed).
Disclaimer
We make every effort to ensure that the information and procedures in this
user manual are accurate and complete. No liability can and will be accepted
for any errors or omissions. ONYX reserves the right to make any changes
without further notice to any products herein.