MAXWELL MW-3551 SR - Manual (Page 8)

1. Take the handle (2) and remove the water
tank (3) from the body (10).
2. Turn over the tank (3); unscrew the lid (7), by
turning it anti clockwise. Fill the water tank
(3) with necessary quantity of water and
screw the lid (7), by turning it clockwise.
3. Set the filled tank (3) on the body of the unit
(10). Wait for some time, which is necessary
to fill the operating chamber with water.
4. Plug in the humidifier.
5. Switch on the humidifier, by turning the han-
dle (12) clockwise; the indicator (8) will be
lighting blue.
6. Set the “steam” intensity by rotating the
handle (12).
7. To switch on the scale backlight (11), press
the (13) button.
8. After operation, switch off the unit, by set-
ting the handle (12) to the “OFF” position,
the indicator (8) will go out.
Note:
- the backlight (8) will help you to estimate
water level in the tank.
- when the tank (3) becomes empty, the
indicator (8) will become red, remove the
tank and fill it with water.
CLEAN AND CARE
Warning! Always switch off and unplug the
unit before cleaning.
Hard water causes the appearance of scale
on the “sprayer” (9), on the inner parts of the
body and on the water tank; it leads to improper
operation of the unit and appearance of white
deposit on the interior. In order to avoid it, it is
necessary to clean the sprayer every week and
change water as often as possible, as well as to
perform cleaning of the filter-cartridge (6).
If you are not going to use the unit for a long
time: - pour out water from the tank and the op-
erating chamber of the “sprayer”, wash the wa-
ter tank, wash and clean the operating chamber
of the “sprayer” and the “sprayer” (9) itself, dry
the unit carefully and take it away for storage.
Weekly care
• Once a week carefully wash the water tank
(3) and the operating chamber under the
water tank (3) with a neutral washing liquid
solution. After that, carefully rinse them with
water.
• Add 5-10 drops of the cleaning agent on the
“sprayer” (9); wait about 2-5 minutes. Use
the brush (14) to remove the deposit from the
surface of the “sprayer” (9).
Note:
- As a cleaning agent for the “sprayer” you
can use substances for scale removal in
kettles.
• Do not immerse the unit into water or other
liquids.
Cleaning the filter
• Clean the filter (6) after about 1000 l of water
passed through it, and when using hard wa-
ter or appearance of “white deposit” on the
furniture, more often.
• Take the handle (2) and remove the water
tank (3) from the body (10).
• Turn over the water tank (3), unscrew the lid
(7) by turning it anti clockwise and remove
the filter-cartridge (6), by turning it anti
clockwise.
• Put the filter-cartridge (6) for 10 minutes into
the bowl with vinegar, take out the filter-car-
tridge (6) and wash it under tapping water.
• Place the filter-cartridge (6) back on the lid
(7), by turning it clockwise.
Storage
- If you are not going to use the unit for a
long time, make sure that all its parts are
dry, including the operating chamber of the
“sprayer”.
- Do not store the device with water in the tank
and the operating chamber of the “sprayer”.
- Before you take the filter-cartridge away for
storage, clean and dry it, keep the filter car-
tridge in a cool darkened place.
Keep the humidifier in a dry cool place out of
reach of children.
8 8
ENGLISH
3551.indd 8 3551.indd 8 18.11.2010 16:40:47 18.11.2010 16:40:47