HONDA 2012 Accord Coupe - Manual (Page 73)

Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Turning the switch to the ‘‘ ’’
position turns on the headlights.
Turning the switch to
the ‘‘ ’’ position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate lights. Turn signal
Off
Parking and indicator lights
AUTO
Headlights on
High beams
Flash high beams
Fog lights off
Fog lights on
If equipped
When the light switch is in the
‘‘
’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or LOCK (0)
position.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver’s
door.
Push the left lever
forward until you hear a click. The
blue high beam indicator will come
on (see page
). Pull the lever back
to return to the low beams.
:
1.
2.
3.
4.
5.
6.
7.
8.
9.
60
Turn Signal
Headlights
High Beams
Turn Signals and Headlights
70
V6 model is shown.
2012 Accord Coupe
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls