HONDA 2008 Pilot - Manual (Page 136)

You cannot load and play 3-inch
(8-cm) discs in this system.
Press and hold the LOAD button
until you hear a beep and see
‘‘LOAD’’ in the display, then
release the button.
To load only one CD, press and
release the LOAD button.
Insert the CD into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD loaded indicator
turns red and blinks as the CD is
loaded.
On the upper left side of the
display, the disc number for an
empty position will begin blinking,
and the green CD load indicator
will come on.
When ‘‘LOAD’’ appears again in
the display, insert the next CD into
the CD slot.
Do not try to insert a disc until
‘‘LOAD’’ appears. You could
damage the audio unit.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, press the LOAD button
again after the last CD has loaded.
The system will begin playing the
last CD loaded.
If you stop loading CDs before all six
positions are filled, the system will
wait for 10 seconds, then stop the
load operation and begin playing the
last CD loaded.
Each time you press and
release /( ), the player skips
forward to the beginning of the next
track. Press and release
/( )
to skip backward to the beginning of
the previous track.
To move rapidly within a track, press
and hold the
/( ) or /
( ). You will see CUE or REW in
the display.
To continuously replay
a track, press and release the RPT
button. You will see RPT in the
display. Press it again to turn it off.
This feature plays the
tracks in random order. To activate
random play, press and release the
RDM button. You will see RDM in
the display. This continues until you
press the RDM button again.
1.
2.
3.
4.
5.
Except for LX model
Loading CDs in the In-dash CD
Changer SKIP
REPEAT
RANDOM
Playing a Disc, Disc Changer
132
2008 Pilot
Table Of Contents Main Menu