HONDA 2011 Odyssey - Manual (Page 140)

Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
If you leave the lights on with the
key removed from the ignition
switch, you will hear a reminder
chime when you open the driver’s
door.
To switch from low
beams to high beams, push the left
lever forward until you hear a click.
The high beam indicator will come
on (see page
). Pull it back to
return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.
Turning the
switch to the ‘‘ ’’ position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ‘‘ ’’
position turns on the headlights.
When the light switch is in the
‘‘
’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position.
73
CONTINUED
Turn Signal
High Beams
Headlights On
Turn Signal and Headlights
Inst
ru
ment
s
a
nd
Cont
ro
ls
137
10/07/17 09:52:10 31TK8600_142
2011 Odyssey