HONDA 2012 Civic Coupe User Manual

Page 295

Advertising
background image

uu

If a Tire Goes Flat

u

Changing a Flat Tire

294

H

a

nd
ling

t

h

e Un

exp

e

cted

1. Open the trunk floor lid.

2. Take the tool case out of the trunk. Take

the jack and wheel nut wrench out of the
tool case.

3. Unscrew the wing bolt, and remove the

spacer cone. Then, remove the spare tire.

4. Place a wheel block or rock in front and rear

of the wheel diagonal to the flat tire.

Getting Ready to Replace the Flat Tire

1

Getting Ready to Replace the Flat Tire

NOTICE

Do not mount the compact spare on the front. If
mounted on the front, the compact spare, smaller in
size than the normal tire, may damage the
differential.

If either front tire goes flat, remove the rear tire on
the same side, and mount the compact spare on the
rear and the rear tire on the front.

2.4 ℓ engine models

Tool Case

Spare Tire

Wheel
Blocks

The tire to be replaced.

CIVIC 2D-31TS8600.book 294 ページ 2011年3月7日 月曜日 午後1時10分

Home

QRG

Index

TOC

2012 Civic Coupe

Advertising
This manual is related to the following products: