Vents, heating, and a/c – HONDA 2009 Odyssey User Manual

Page 216

Advertising
background image

Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page

). If it moves near the red mark,

turn off the A/C until the gauge
reads normally.

The ventilation system draws in
outside air, circulates it through the
interior, then exhausts it through
vents near the rear side panels.

The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.

Select

and fresh air mode.

Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial or
buttons.

Set the temperature control dial or
button to the lower limit.
Make sure the A/C is off.
Select

and fresh air mode.

Set the fan to the desired speed.

Press the A/C button. The
indicator in the button comes on
(LX and Canadian DX models) or
‘‘A/C ON’’ is shown in the display
(EX, EX-L and Touring models)
when a fan speed is selected.
Make sure the temperature is set
to the lower limit.
Select

.

If the outside air is humid, select
recirculation mode. If the outside
air is dry, select fresh air mode.
Set the fan to the desired speed.

1.

2.

3.
4.

5.

1.
2.
3.

1.

2.
3.
4.

77

CONTINUED

Vents, Heating, and A/C

Using the A/C

Ventilation

Using the Heater

Fe
a

tu

re

s

213

2009 Odyssey

Table Of Contents

Main Menu

Advertising