Entering a destination, 2009 element – HONDA 2009 Element Navigation User Manual

Page 36

Advertising
background image

36

Navigation System

Showing the Map of Current
Position

The

Current Position

selection

assumes that you are looking for a
destination in the immediate area. The
display changes to:

The red arrow indicates your vehicle
position. Find your desired destination
by moving the joystick left, right, up, or
down. The map and crosshairs will
move in the same direction.

The yellow box indicates the area you
will see when you click on the current
map with the joystick. The scale will
decrease each time you push in on the
joystick, until

Select a destination

appears at the top of the screen.

If desired, use the

ZOOM

buttons to

change the map scale. When you have
the crosshairs on the desired icon, map
feature, or road, push in on the joystick.
The address of the location will appear
at the top of the screen.

NOTE:
The selected icon or road segment is
displayed on the 1/2 mile (800 meter) or
less map scale.

If this is the desired destination, push in
on the joystick again. If not, use the
joystick to reposition the crosshairs,
then push in on the joystick again to
display the new address.

If you selected a single icon or road
segment within the target mark, the
following screen appears. Push in on the
joystick again to calculate a route to the
selected destination.

Entering a Destination

2009 Element

Main Menu

Advertising
This manual is related to the following products: