HONDA 2011 CR-Z - Manual (Page 71)

70
Instrument Panel
Indicators
Indicator Name On/Blinking Explanation Message
Seat Belt
Reminder
Indicator
Comes on and the beeper sounds •
if you are not wearing a seat belt
when you turn the ignition switch
to ON
II . If the passenger is not
wearing a seat belt, the indicator
comes on about six seconds later.
Blinks during driving if either you
•
or your passenger has not fastened
a seat belt. The beeper sounds
and the indicator blinks at regular
intervals.
The beeper stops and the indicator •
goes off when you and your
passenger fasten your seat belts.
Stays on after you or your
•
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have the
vehicle checked by a dealer.
Seat Belt Reminder Indicator P.35
Low Fuel
Indicator
Comes on when the fuel reserve is •
running low (approximately 1.8 U.S.
gal./6.9 Liter left).
Blinks if there is a problem with the
•
fuel gauge.
Comes on • - Refuel your vehicle as
soon as possible.
Blinks
• - Have the vehicle checked by
a dealer.
ABS (Anti-lock
Brake System)
Indicator
Comes on for a few seconds when •
you turn the ignition switch to ON
II , then goes off.
If it comes at any other time, there •
is a problem with the ABS.
Stays on constantly • - Have the
vehicle checked by a dealer. With
this indicator on, your vehicle still has
normal braking ability but no anti-lock
function.
ABS (Anti-lock Brake System) P.221
31SZT600book.indb 70 2010/04/28 13:40:55
2011 CR-Z