Using the standby receptions, Storing your favorite programme types – JVC KD-G441 User Manual

Page 8

Advertising
background image

8

ENGLISH

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if the
current level is lower than the preset level (see
page 15).

To activate TA Standby Reception

The TP (Traffic Programme) indicator
either lights up or flashes.

• If the TP indicator lights up, TA Standby Reception is

activated.

• If the TP indicator flashes, TA Standby Reception is

not yet activated. (This occurs when you are listening
to an FM station without the RDS signals required for
TA Standby Reception.)

To activate TA Standby Reception, tune in to another

station providing these signals. The TP indicator will
stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.

To activate and select your favorite PTY code for
PTY Standby Reception,
see page 15.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby Reception

is activated.

• If the PTY indicator flashes, PTY Standby Reception is

not yet activated.

To activate PTY Standby Reception, tune in to another

station providing these signals. The PTY indicator will
stop flashing and remain lit.

!

Start searching for your favorite

programme.

If there is a station broadcasting a programme
of the same PTY code as you have selected, that
station is tuned in.

Storing your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons
(1 to 6):

1

Select a PTY code (see pages 7 and 8).

2

Select the preset number (1 – 6) you want to

store into.

3

Repeat steps 1 and 2 to store other PTY codes

into other preset numbers.

4

Finish the procedure.

Ex.: When “ROCK M” is selected

EN08-17_KD-G441_003A_4.indd 8

EN08-17_KD-G441_003A_4.indd 8

10/24/07 10:04:07 AM

10/24/07 10:04:07 AM

Advertising