JVC KD-S621 - Manual (Page 17)

17
ENGLISH
Selecting the level display
– LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “VOL2” is
selected.
• VOL1: Shows the volume level indicator.
• VOL2: Alternates “VOL1” setting and
illumination display.
• OFF: Erases the volume level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode – “VOL1,”
“VOL2” or “OFF.”
4
Finish the setting.
S E L
Canceling Advanced SCM
– SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H”, “CLOCK M”, “SCM LINK” or
“LEVEL” appears on the display.
2
Select “SCM LINK” if not shown on
the display.
3
Select the desired mode – “LINK ON”
or “LINK OFF.”
4
Finish the setting.
4
¢
S E L
S E L
4
¢
S E L
VOL2 VOL1
OFF
LINK OFF LINK ON
CLOCK H CLOCK M
LEVEL SCM LINK CLOCK H CLOCK M
LEVEL SCM LINK
EN16-18KD-S621[E]f.pm5 11/30/01, 11:43 AM 17