JVC KW-NSX1 - Manual (Page 58)

58
ENGLISH
Mobile phone
Menu items Selectable setting/item Initial: Underlined
Connection ♦ Connect
♦ Disconnect
: ☞ page 51
: ☞ page 51
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
Phone Device* 1 Shows the phone device name.
Audio Device* 2 Shows the audio device name.
Auto connect ♦ On
♦ Off
: The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
: Cancels.
HF/Audio Output Select the speakers used for Bluetooth (both phone use and audio player).
♦ Front
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list and
call lists.
Auto Answer* 1 ♦ On
♦ Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the calls
manually.
SMS Notify* 1 ♦ On
♦ Off
: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
: The unit does not inform you of the arrival of a message.
Ring Mode* 1 ♦ System
♦ Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
Ring Tone
Change*
1
When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
* 1 Appears only for the phone setting screen.
* 2 Appears only for <Mode> screen while “BT Audio” is selected as the source.
Bluetooth audio player
On “BT Audio” source control screen:
Bluetooth device settings
EN_KW-NSX1[E].indb 58 EN_KW-NSX1[E].indb 58 12/04/23 16:52 12/04/23 16:52