JVC KW-AV70BT - Manual (Page 69)

69
ENGLISH
Symptom Remedy/Cause
USB/SD*
“Now Reading...” keeps flashing on the
screen. Turn off the power and on again.
While playing a track, sound is sometimes
interrupted. The tracks are not properly copied into the USB device or
the SD card. Copy tracks again, and try again.
iP
od/iPhone
No sound comes out of the speakers. • Disconnect the iPod, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does
not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 30)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated. Turn off (uncheck) “VoiceOver” of the iPod. For details, visit
<http://www.apple.com>.
No operations are available when playing
back a track containing Artwork. Operate the unit after the Artwork is loaded. (☞ page 31)
Sound does not synchronize with the video. Select <iPod> for <AV Input>. (☞ page 45 )
• Videos cannot be played.
• No sound of videos come out. • Connect with USB Audio and Video cable JVC KS-U30.
Other cables cannot be used.
• Select <iPod> for <AV Input>. (☞ page 45 )
AV
-IN
No picture appears on the screen. • Turn on the video component if it is not on.
• Connect the video component correctly.
* Only for KW-AV70BT.
EN_KW-AV70E.indb 69 EN_KW-AV70E.indb 69 11/12/16 18:03 11/12/16 18:03