Adjusting the crossover frequency – JVC KW-AV60BT User Manual

Page 35

Advertising
background image

35

ENGLISH

Adjusting the crossover
frequency

1

On <AV Menu> screen:

2

3

Select the item to adjust, then make

adjustments.

Adjusts the subwoofer level.

Adjusts the crossover frequency.

Selects the phase for the subwoofer.*

Adjusts the crossover for front or rear speakers
(high pass filter).

Adjusts the crossover for subwoofer (low pass filter).

* Not selectable when <Freq> is set to <Through>.

Adjusting the sound precisely

1

Perform

steps

1

and

2

of “Selecting a

preset sound mode,” then...

2

Select a band.

3

Adjust the sound.

Reset

Changes level of Low/Mid/
High to 0.

Freq

Selects frequency.

Q

Adjusts the width of the
frequency.*

1

Bass

Activates/deactivates bass.*

2

SW Level

Adjusts subwoofer level.

The adjustments are overwritten if <User>
setting has been made (☞ page 34), and <User>
is activated.

• The adjustments are memorized until you

adjust sound again.

• To make adjustment for other bands, repeat

steps

2

and

3

.

*

1

Fixed for “High” band.

*

2

Only for “Low” band.

EN_KW-AV60E.indb 35

EN_KW-AV60E.indb 35

11/12/12 19:02

11/12/12 19:02

Advertising