JVC KV-PX501 - Manual (Page 15)

15
3. Bend the bracket support to a proper angle. Suction the vehicle bracket securely
to the windshield, ensuring its base is resting firmly on the dashboard.
4. Follow the directions to insert the bracket into the slots on the bracket, and slide
to fix the set (A Æ B).
5. The in vehicle bracket assembly is complete.
9 When using the in-vehicle secure
bracket, do not install in a location that
will block the view of the driver
9 Recommended installation requirements:
The bracket base should be resting securely
on the dashboard to prevent excessive
shock.
Using the Car Charger
While using the device in a vehicle, use the included car charger for long periods of
usage.
1. Plug in the small plug into the power
jack on the rear of the in vehicle
bracket.
2. Insert the other end into the cigarette
lighter.
EN
G
LISH