JVC DLA-X95R - Manual (Page 54)

PC D C
Setting is enabled when the PC input terminal is selected.
Setting Description
Auto Alignment Adjusts “Tracking”, “Phase”, and “Picture Position” automatically.
Tracking Adjusts the horizontal size and display position of the video image.
Phase Adjusts flicker and blur in the video image.
Picture Position Horizontal Adjusts the horizontal position of the video image.
Vertical Adjusts the vertical position of the video image.
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical
synchronization signals.
* Adjustment cannot be made during 3D signal input.
Aspect (Video) / Aspect (PC)
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ “Adjusting the Screen Size (Aspect)” （p. 33）
Mask
For hiding the peripheral area of the image with a mask (black strip).
Setting Description
Off Not masked.
2.5% Masks about 2.5% of the peripheral area of the image.
5% Masks about 5.0% of the peripheral area of the image.
Custom Masks about 0% to 5% of the four sides of the image.
Progressive
For converting the interpolation setting of the interlaced signals.
Setting Description
Auto Performs interpolation by automatically detecting whether the interlaced signals
are converted from 24p video images, such as those in film movies, or interlaced
signals of video materials.
Off Interpolates video images as interlaced signals of video materials, etc.
3D Setting
For setting 3D movies for viewing.
Æ “Viewing 3D Movies” （p. 34）
Mask: black strip around the periphery
On
Off
54
Adjust/Set