Plantronics M55 - Manual (Page 3)

PLT_M55
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of
introducing your headset to your
phone. Before using your headset
for the first time, you must pair
it with your Bluetooth-enabled
phone.
“Multipoint” lets you pair this
headset with two phones so you
can answer a call from either
phone.
1. READY
First Time, Right Out of the Box:
Turn on the headset. The LED
flashes red/white to indicate
pairing mode.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
white.
2. SET
Activate the Bluetooth feature
on your phone, then use phone
menus to “add,” “search” or “scan”
new Bluetooth devices.
For Example:
iPhone: Settings > General >
Bluetooth: On (starts the search
for devices)
BlackBerry®: Settings/options >
Bluetooth: On > Search for devices
Android™: Settings > Wireless &
Networks > Bluetooth: On > Scan
for devices
3. CONNECT
Select “PLT_M55” from the list of
Bluetooth devices shown on your
phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
white once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.