Plantronics Voyager PRO UC - Manual (Page 15)

15
Smart Sensor features
Smart Sensors detect whether or not you are wearing the headset. Sensors are located in the
ear loop and the speaker.
Auto answer call:
When you are not wearing
your headset.
When you have an incoming call on your mobile
or computer softphone, put on the headset and
the call will be answered automatically. You do
not have to press the call button.
Auto pause media:
When you are listening
to audio.
When you are listening to audio from your
mobile phone or PC, remove the headset and the
audio pauses. Place your headset back on and
the audio resumes.
Note If the media player has been playing less
than 10 seconds you will have to manually
restart the media player.
Note If the audio remains paused for more
than 5 minutes you will have to manually
restart the media player.
Auto transfer call:
Whether you are wearing your
headset or not.
If you are not wearing your headset and you
answer an incoming call on your mobile phone,
the audio will be routed to the mobile phone.
When you put the headset on, the audio will be
automatically transferred to the headset.
If you are already wearing your headset and
there is an incoming call, the audio will be
routed to the headset and you will need to press
the call button to answer the call.
Auto lock call button:
When you are not wearing
your headset
Prevents accidental dialling from your mobile
phone when the headset is not worn.
Auto pair
When you are wearing
your headset
Automatically pairs headset to mobile phone
and PC when headset is on and within range
of devices. Voice prompt will announce you are
connected.
NOTE These features are enabled by default and can be disabled in the Plantronics Control Panel:
Devices>Device Settings>Headset Tab. The Plantronics software must be downloaded to access
the Control Panel. Changes to the settings requires that you are connected and within range of
the USB adapter. Load Plantronics software by visiting
plantronics.com/software and click on
Advanced features