Plantronics ML20 - Manual (Page 3)

3
CONNECT TO YOUR PHONE
“Pairing” is the set-up
process of introducing your
headset to your phone.
Before using your headset
for the first time, you must
pair it with your Bluetooth-
enabled phone. 1. READY
First time, right out of the box:
Turn on the headset. The LED
flashes red/blue to indicate
pairing mode.
Pair new phone:
Turn on headset. Press call button
until the LED flashes red/blue.
2. SET
Activate the Bluetooth feature
on your phone, then get phone
to add/search/discover new
Bluetooth devices.
Phones have different menus to
select from:
iPhone: Settings > General >
Bluetooth > On
(starts the search for devices)
Android
™ : Settings > Wireless &
Networks > Bluetooth: On > Scan
for devices.
3. CONNECT
Select “PLT_ML18” or “PLT_ML20”
from the list of Bluetooth devices
shown on your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once your phone and headset
are successfully paired/connected.
You can now make a call using
your phone’s keypad or voice-
dialing feature.