Plantronics Savi W430 - Manual (Page 15)

Plantronics Savi User Guide 15
Feature Settings Default
Media player Action to media player
– When a call begins
– When a call ends
Mute/pause/do nothing
Unmute/play/do nothing
Pause
Play
General Launch audio devices control panel (Provides a shortcut to the Windows Sounds and Audio Devices
control panel.)
Default softphone (Displays the default softphone.)
Ring both headset and PC Selected/not selected Selected
Microsoft Lync/Office Communicator dial tone
enabled Selected/not selected Not selected
Audio sensing enabled Selected/not selected Not selected
Maintain headset to PC link Selected/not selected Not selected
Preferences tab
The Preferences tab allows you to set preferences for the media player as well as other general settings.
Ring both headset and PC
This parameter gives you the option to have the PC ringtone
played on both the headset as well as the PC speaker.
When this parameter is selected, the PC ringtone will be heard on
both the PC speaker as well as the headset.
When this parameter is not selected, the PC ringtone will only be
heard on either the headset or the PC speaker based on how the
PC audio has been set up.
Microsoft Lync/Office Communicator certified product:
Default setting = Not selected
Standard product: Default setting = Selected
Microsoft Lync/office Communicator dial-tone enabled
If this feature is selected, when a PC radio link is established,
Microsoft Lync/Office Communicator will assume the user is trying
to place a VoIP call and provide a dial tone.
If this feature is not selected, when a PC radio link is established,
Microsoft Lync/Office Communicator will sit idle.
“Microsoft Lync/Office Communicator dial tone enabled” can be
set selected or not selected.
Microsoft Lync/Office Communicator certified product:
Default setting = Selected
Standard product: Default setting = Not selected
Audio sensing enabled
Audio sensing is a special feature supported by Plantronics
wireless devices that can detect an audio signal at the USB port
and automatically establish a PC radio link between the USB
adapter and wireless headset without the user having to press
the PC call control button. If the parameter “Microsoft Lync/
Office Communicator dial tone enabled” is selected, then every
time a PC radio link is established the Microsoft Lync/Office
Communicator dial tone will be heard. However, the user may
have pressed the PC call control button to listen to music etc.,
and does not want to hear the dial tone. In this case, if the user
selects the “Audio sensing enabled” parameter, the radio link will
be established automatically when any PC audio is detected at
the USB port, thus eliminating the need for the user to press the
PC call control button.
“Audio sensing enabled” can be set to selected or not selected.
Microsoft Lync/Office Communicator certified product:
Default setting = Selected
Standard product: Default setting = Not selected
Maintain headset to PC link
This parameter forces the radio link to the PC to stay active
even after the call has ended. This can eliminate the need to
re-establish the radio link when switching between PC audio
applications.
Default setting = Not selected
About tab
The About tab provides on-line access to this printable user guide
and also includes Plantronics contact information. The version
of software and firmware currently running on your system is also
shown here.