Plantronics .Audio 920 - Manual (Page 4)

The USB Bluetooth adapter is automatically powered on upon inserting into the USB port
of the computer. If your USB port on the computer is hard to access, you can use a USB
extension cable (not included).
NOTE: The USB Bluetooth adapter is automatically active with the current paired headset upon
powering on.
Before using your headset for the first time, you must pair it with your Bluetooth phone or
device. Be sure the headset is fully charged. For set up and pairing instructions with Bluetooth
devices other than mobile phones, please consult your Bluetooth device user guide.
Turn on both devices.
6 7
POWEriNg PAiriNg
Powering uSB Bluetooth Adapter Pairing headset with Bluetooth Phone
Turn ON the Bluetooth feature on
your phone.
TiP: For most phones, select
Settings/Tools >Connections >
Bluetooth
> On. See your phone’s
user guide for more information.
Turn the headset off by pressing
and holding the call control button
until the indicator turns red and then
turns off.
Turn the headset back on by pressing
and holding the call control button
until the indicator flashes red/blue.
The headset is now in pairing mode.
Use the commands on your phone to
locate your headset.
1.
2.
3.
4.
TiP: For most phones, select
Settings/Tools > Connections >
Bluetooth
> Search > 520Plantronics.
See your phone’s user guide for more
information.
When prompted for the password,
enter 0000.
When pairing is successful, the
indicator on your headset flashes
blue. Your headset is now connected
and ready to use.
5.
1
2
3
4