Plantronics Explorer 370 - Manual (Page 12)

8
Headset Controls
Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
Answer a call Briefl y press the call control button.
When you receive a call, your phone may ring
before your headset rings. Wait until you hear
the ring in your headset before you press the call
control button to answer the call.
Reject a call Press the call control button for 2 seconds.
End a call or cancel
an outgoing call Briefl y press the call control button.
Make a call Enter number on your phone, press send, and
the call is automatically transferred to headset; no
need to press call control button.
Adjust the volume Briefl y push up or down on the volume button for
incremental volume steps. You will hear two tones
(high tone followed by low tone) at the volume limit.
WARNING Do not use headphones/headsets
at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen
at moderate levels. See www.plantronics.com/
healthandsafety for more information on headsets
and hearing.
13223_UG_370_EN.indd 8 223_UG_370_EN.indd 8 19/2/08 11:59:57 19/2/08 11:59:57