Plantronics M20 - Manual (Page 3)

PLT_M50
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of
introducing your headset to your
phone. Before using your headset
for the first time, you must pair it
with your Bluetooth-enabled phone.
“Multipoint” lets you pair this
headset with two phones so you
can answer a call from either phone.
You must activate multipoint before
pairing second phone.
1. READY
First Time, Right Out of the Box:
Turn on the headset. The LED
flashes red/blue to indicate
pairing mode.
Activate Multipoint (for 2nd phone):
While pressing Call button, turn
on the headset and continue
pressing Call button until LED
flashes blue twice. Repeat to turn
off multipoint.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
blue.
2. SET
Activate the Bluetooth feature
on your phone, then get phone
to add / search / discover new
Bluetooth devices.
Phones Have Different Menus to
Select from, for example:
iPhone: Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry® smartphone:
Settings/options > Bluetooth: On >
Search for devices
Android™:
Settings > Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_M20” or “PLT_M50” from
the list of Bluetooth devices shown
on your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.