Plantronics Calisto Pro Series - Manual (Page 10)

Page 4
Setup
Hooking up the base
Remove the QuickTips card from
under the base.
Plug the AC power adapter into the
bottom of the Calisto base, and then
plug it into an available wall outlet.
Route the AC power adapter cable
under the cable holder as shown.
Plug one end of the telephone cable into the Calisto base and the
other end into an available wall telephone jack. If needed, use the
splitter included to share the wall jack with another device.*
Route the phone line cable under the cable holder as shown.
To use the VoIP capability, plug smaller end of the USB cable into
the Calisto base and the other end into an available USB port on
your computer.
Insert the Calisto Pro Series CD-ROM into your computer,
and follow the onscreen instructions. If the CD-ROM doesn’t
automatically play, double-click the
My Computer icon on
the Windows desktop and choose the CD-ROM. Then run the
program
Setup.exe.
* For use with a 4-wire -line wall outlet (RJ14C) a -line, 3-way jack adapter is required. Like most
landline phones, DSL users will need a DSL filter.
Completed system
1.
.
3.
4.
5.
6.
7.