Plantronics Pulsar 260 Stereo Bluetooth headset - Manual (Page 4)

6
| |
7
WEARING OPTIONS
Pulsar 260 can be worn in two ways:
• Clipped to your belt or clothing
• Around your neck using the lanyard
POWERED SPEAKER & STEREO USES
POD CONTROLS
KEY FEATURE Action Tone
Power on/off Short press No tone
Track forward and
back* Short press to skip to next
track or to go back to
previous track High tone
Mute call/audio Short press to mute/unmute Repeating low tone
every 60 seconds
Play and pause* Short press to pause/
resume audio High tone
Adjusting volume Short press Mid tone for each
adjustment, double
low tone at limit
* Only works if Bluetooth device supports Bluetooth Audio/Video Remote
Control Profile (AVRCP).
Power on/off
For public listening you can connect the
stereo Bluetooth pod directly to powered
speakers or your home stereo with the
included audio-out cable (provided your
speakers/home stereo is fi tted with a
Line-in or Auxiliary 3.5mm audio socket).
Please consult your equipment guide.
1. Ensure the stereo Bluetooth pod
and your speakers/home stereo are
powered off.
2. Connect the audio-out cable 2.5mm
plug to the stereo Bluetooth pod
and the 3.5mm plug to the powered
speakers/home stereo Line-in or
Auxiliary 3.5mm audio socket as
shown below.
3. Power on both the stereo Bluetooth
pod and your speakers/home
stereo.