Plantronics Voyager 815 - Manual (Page 13)

1 Plantronics Voyager 815
EN
E
N
G
LI
S
H
iNdiCATOrS
Action Light Tone
Charging Solid red None
Fully charged None None
Low battery 3 red flashes every 10 seconds 3 high tones
every 10 seconds
Pairing Flashes red and blue 1 low tone
Paired Flashes blue 1 low tone
Turning on Solid blue for 2 seconds Ascending tones
Standby None None
Incoming call 3 blue flashes every 2 seconds 3 low tones every
2 seconds
Call in progress 1 blue flash every 2 seconds None
Missed call 3 purple flashes every 10 seconds None
Out of range None 1 high tone
Back in range None 1 low tone
Turning mute on None 1 low-high tone
Mute is active None 1 low tone every
60 seconds
Unmute None 1 high-low tone
Turning off Solid red for 4 seconds Descending tones
NOTE:
To turn off the online indicator, see “Headset Controls” on page 11.
rANgE
To maintain a connection, keep your headset within 33 feet (10 metres) of
the Bluetooth device. If there are obstacles between your headset and the
device you may experience interference. For optimal performance, place
your headset and phone on the same side of your body.
As you move out of range, audio quality degrades. When you are far enough
away to lose the connection, you hear a high tone in the headset. The
headset attempts to reconnect after 30 seconds. If you move back in range
later, you can manually reconnect by pressing the call control button.
NOTE: Audio quality is also dependent upon the device with which the headset is
paired.