Hyundai H-MW1420 - Manual (Page 7)

7
How to identify if certain cookware is suitable for microwave cooking purpose?
Put the intended cookware together with a glass of water (300 ml) inside the oven cavity, and then set the oven at the "HIGH" stage for one minute.
Applicable microwave cookware will be as cool as ever, while the water will absorb the energy and become warmer.
Operating knobs
Timer
The max length could be set is 30 minutes, when timer goes to the 0 position, a bell prompt will be heard.
Function knob
a) Microwave cooking (5 power level selection) only magnetron is energized, utilizing the properties of microwave penetration thick food. The center of
food can be done, but the brown crust can not be obtained.
1) .: 100% power (quick cooking)
2) .: 81% power (Roasting)
3) .: 58% power (slow cooking)
4) .: 36% power
5) .: 18% power (keeping warm)
b) Grill only heat element is energized. Good brown color will be obtained, even the color makes you mouth water, but if the food is thickly, it may result in
the surface of food has been burned, but the center of the food is unbaked. Is suitable for broiling sausage, chicken wings, chops, meat slice, sandwich
and etc.
c) Combination magnetron and heat element work in an alternate way. According to the properties of food, utilizing the excellence of Grill and microwave,
obtaining the best result.
1) 1: 30% operation time the magnetron is energized and 70% time heat element is energized. Is suitable for roasting chops, sandwich and etc.
2) 2: 49% operation time the magnetron is energized and 51% time heat element is energized. Is suitable for broiling small chicken and meat.
3) 3: 67% operation time the magnetron is energized and 33% time heat element is energized. Is suitable for broiling large chicken, duck and
etc.
Operation
1. Connect the microwave oven to power supply.
2. Place the food on the rotate plate and close the door.
3. Set the function selector.
Note: 1) Grill rack should be removed in microwave cooking function.
2) The distance between food and heat element must be at least 5cm.
4. Set the timer. If your set time is less than 2 minutes, first turn the timer to over 3 minutes position and then turn back to your desired time.
5. Then the oven began operation. And the operation process can be terminated at any time just by opening the door. Once the door is closed the
process will be continued.
6. A bell ring will be heard after time out. And the oven is de-energized and lamp will be off.