Candy GO V58F - Manual (Page 11)

Control panel and indicator lights
Programme Selector – Select the required programme
Delay Start button – Allows the user to delay the start of the drying cycle (see
details of Operation on page 15)
Start/Pause button – Press Start/Pause to commence the selected drying
programme
Acrylics/Synthetics button – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
Filter Care indicator – lights when the filter needs cleaning
Progress display
DRY – When the programme is selected the DRY indicator will flash, when the
programme starts the DRY indicator will light up.
– Indicator lights when there is a short time left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool
Down phase.
The length of the Cool Down phase varies between 10 and 15 minutes
depending on the programme.
END – Indicator lights when the programme is finished.
11
Controls and indicators
FILTER CARE
INDICATOR
PROGRESS
DISPLAY
START/PAUSE
BUTTON
ACRYLICS/SYNTHETICS
BUTTON
PROGRAMME
SELECTOR
DELAY START
BUTTON
40006013Eng.qxd 06/07/2009 13:01 Page 11