Candy CIC 60 - Manual (Page 9)

Operation
9
1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
‘HEAT SETTING’ button to reduce the
heat level. Press again on completion, to
select high temperature.
3. Turn ‘DRYING TIME’ dial until the
required drying time aligns with the
symbol (▼).
4. Gently close the door pushing it slowly
until you hear the door ‘click’ shut.
5. Press the ‘ON’ button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 15 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol (▼).
Open the door and remove the load.
8. Clean the filter and empty the water
container after every drying cycle to
ensure maximum dryer efficiency.
(See ‘Filter’ and ‘Water Container’
sections).
9. Clean the condenser after
approximately every 10 drying cycles to
ensure maximum dryer efficiency.
(See ‘Condenser’ section).
1. ‘ON’ button and indicator – press to switch on, the indicator will light.
2. ‘HEAT SETTING’ button - press to reduce the heat level for delicate items, press
again to select high temperature.
3. ‘DRYING TIME’ dial - selects drying time or pre-ironing option (a).
4. ‘CLEAN FILTER’ indicator - lights when the filter needs cleaning.
5. ‘EMPTY WATER’ indicator - lights when water container is full.
Heat setting
Heat setting
Heat setting
Heat setting
Operation
WARNING!
THE DRUM, DOOR AND LOAD
MAY BE VERY HOT.
05651181 25/6/01 8:33 pm Page 9