Candy GO DV 38-37 - Manual (Page 11)

Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light
Start button – Press to commence the selected drying programme. Press for 5
seconds to cancel/reset the programme
‘Delicados/Sintéticos’ button – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset.
Low Heat – Indicator light ON
High Heat – Indicator light OFF
‘Filtro’ Indicator – Lights when the filter needs cleaning
‘Inicio Diferido’ Button – Allows the user to delay the start of the drying cycle
(see details of operation on page 14).
Time Remaining Display
START – When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion
of the programme
15' – Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool down phase
STOP – Indicator lights when the programme is finished.
6h – 6 hour start delay (light flashes when in operation)
9h – 9 hour start delay (light flashes when in operation)
11
Controls and indicators
FILTER CARE
INDICATOR
TIME REMAINING
DISPLAY
ON/OFF
BUTTON
ACRYLICS/
SYNTHETICS
BUTTON
(Delicados/
Sintéticos)
PROGRAMME
SELECTOR
START
BUTTON
START DELAY
BUTTON
(Inicio
Diferido)
40005056Eng.qxd 07/06/2007 10:52 Page 11