Candy AB CV1 66-37 - Manual (Page 11)

Control panel and indicator lights
Programme Selector – select the required programme
On/Off button and indicator – press to switch on, the indicator will light
Start button – Press to commence the selected drying programme. Press for 5
seconds to cancell/reset the programme
Acrylics/Synthetics (Delicados Sintéticos) button – press to reduce the heat
level for delicate items, the indicator above the button will light up. To change
the heat setting the programme must be reset.
Low Heat – Indicator light ON
High Heat – Indicator light OFF
FILTER CARE (Filtro) Indicator – lights when the filter needs cleaning
START DELAY (Inicio Diferido) Button – Allows the user to delay the start of
the drying cycle (see details of operation on page 14).
Time Remaining (Tiempo Restante) Display
START – When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion
of the programme
15' – Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool down phase
STOP – Indicator lights when the programme is finished.
6h – 6 hour start delay (light flashes when in operation)
9h – 9 hour start delay (light flashes when in operation)
11
Controls and indicators
FILTER CARE
INDICATOR
TIME REMAINING
DISPLAY
START
BUTTON
START DELAY
BUTTON
ON/OFF
BUTTON
ACRYLICS/SYNTHETICS
BUTTON
PROGRAMME
SELECTOR
40003880Eng.qxd 10/10/2005 17:27 Page 11