Candy PA 640__2 X UK User Manual

Page 11

Advertising
background image

11

11

11

11

11

INSTALLATION: "ELECTRICAL CONNECTION

"ELECTRICAL CONNECTION

"ELECTRICAL CONNECTION

"ELECTRICAL CONNECTION

"ELECTRICAL CONNECTION"""""

The mains electricity supply connected to the appliance should comply with the norms in

force in the country of installation.

Connection to the mains electricity supply should be through a socket with an earth terminal,

or through an intermediary switching device with a gap between contacts of at least 3 mm.

The power supply unit must be protected by appropriate fuses and use cables of a large

enough cross section to provide a normal supply to the appliance.

The hob is fitted with a power supply cable* which allow it to be connected only to a power

supply of 230 V between phases, or between phase and neutral.

• Connect to a 10/16 Amp socket. Before connecting, it is compulsory

• Connect to a 10/16 Amp socket. Before connecting, it is compulsory

• Connect to a 10/16 Amp socket. Before connecting, it is compulsory

• Connect to a 10/16 Amp socket. Before connecting, it is compulsory

• Connect to a 10/16 Amp socket. Before connecting, it is compulsory

to check :

to check :

to check :

to check :

to check :

. the power supply voltage shown on the electricity meter,

. the adjustment of the circuit breaker, and

. the fuse rating 10A.

Note : the socket must be reachable for any eventual repair. Take care of its location

at the time you install the hob.

Warning : before proceeding with the connection, check the continuity of the

Warning : before proceeding with the connection, check the continuity of the

Warning : before proceeding with the connection, check the continuity of the

Warning : before proceeding with the connection, check the continuity of the

Warning : before proceeding with the connection, check the continuity of the

earthing of the power supply unit.

earthing of the power supply unit.

earthing of the power supply unit.

earthing of the power supply unit.

earthing of the power supply unit.

We cannot be held responsible for any accident which has resulting from the use

We cannot be held responsible for any accident which has resulting from the use

We cannot be held responsible for any accident which has resulting from the use

We cannot be held responsible for any accident which has resulting from the use

We cannot be held responsible for any accident which has resulting from the use

of an appliance which is not connected to earth, or whose earthing is defective.

of an appliance which is not connected to earth, or whose earthing is defective.

of an appliance which is not connected to earth, or whose earthing is defective.

of an appliance which is not connected to earth, or whose earthing is defective.

of an appliance which is not connected to earth, or whose earthing is defective.

* The eventual replacement of the supplying cord must be carried on by the After Sales

Service or by an agreed engineer, with a cord whose characteristics must be similar to the

original one : cord type H05 V2V2-F, 3 G 0,75 section.

Advertising