SINBO SK 2395 - Manual (Page 14)

OPENING TOP LID
Set Air pot on table top.Open top lid and fill water to
desired capaciity.
• Always fill water above the minimum mark but below the maximum water
level line indicator.
GLOSING TOP LID
Carefully close lid by pressing down untill a click sound is heard.
• Do not close the upper lid forcefully.(Hot water may gush out and cause scalds.)
1. Insert the receptacle “Fully”into the Air pot power inlet.Plug into
the wall socket.
2. Do not switch on.When the container is empty.
• When rotating the body,be careful that the power cord does not get in the way.
BOIL KEEP WARM
BOIL BOIL
KEEP WARM KEEP WARM
1. “Boil” light is on during boiling process.
2. It will switch to “keep warm”automatically after the water is boiled.
• Do not open the upper lid.
• Do not touch the steam coming out of the steam vent.
• Do not place cloth or any other items covering the steam vent.
• Do not dispense hot water while the water is boiling.
POURING HOT WATER
1. The hot water might not dispense smoothly right after boiling.
2. Press on the”AUTO DISPENSE”button to dispense hot water.
• CAUTION: Always keep the lid away from you as there is hot steam trapped
under the lid.
• Do not press the dispensing button when the inner water reservoir is empty.(Doing so
can cause damage.)
• You cannot dispense hot water by pressing Auto Dispense button or the Cup Switch if
the Thermo Flask is unplugged.
REFILL WATER
When water reaches to “Refill water”line,add water for automatic boiling.
• Do not add water above full-water indicator scale.Water level below
refill mark may cause malfun.
- 13 -
USING