Candy CDF8 312 X - S - Manual (Page 12)

23
PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" programme
(which is set in the factory and is
ideal for full-load daily use) for quick
and accurate selection;
- the memory function which saves
the last programme used, so that if
you regularly use the same washing
cycle, you do not have to re-set the
programme every time, thereby
saving time and effort.
"EXPRESS" button
This button offers a choice of 2 levels of
wash intensity, according to how dirty the
dishes are. It also reduces the time and
energy used.
Pressing the "EXPRESS" button enables
the user to reduce the wash intensity, by
changing the time cycle and temperature.
The use of this button together with the 4
programmes shown on the display panel,
offers the user a choice of 8 different wash
cycles.
IMPORTANT
Once selected, this button remains
active (with the corresponding
indicator light on) for successive
wash programmes, unless it is
pressed again (corresponding
indicator light goes off) or the cycle
in process is cancelled.
Programme settings
■ Open the door and place the dirty dishes
inside the appliance.
■ Press the "ON/OFF" button .
The indicator light for the
"recommended"
programme or the indicator light for the
last programme used will flash.
■ To set another programme, press the
"PROGRAMME SELECTION" button.
■ If you wish, press the "EXPRESS"
button.
■ If you wish to select an option, press the
option button (the corresponding indicator
light will light up).
The option button can be selected or
deselected WITHIN one minute of the
programme commencing.
■ Press the "START" button (the selected
programme indicator light will stop
flashing and remain on.
■ When the door is shut, after an audible
signal has sounded, the programme will
start automatically.
WITHIN one minute of the programme
commencing, another programme
can be selected, simply by pressing
the "PROGRAMME SELECTION"
button (it is also possible to select or
deselect the "EXPRESS" button).
Programme interruption
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically.
Close the door,
without pressing any
buttons . The cycle will start from where it
left off.
IMPORTANT
A running program can be interrupted
without opening the door by
pressing the "ON/OFF" button. In
this case, simply press the "ON/OFF"
button again to restart the cycle from
where it left off.
WARNING!
If you open the door during the
drying cycle, an audible audio signal
advises you that the drying cycle has
not yet finished.
22
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage 12
8 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
DESCRIPTION OF THE CONTROL PANEL
TECHNICAL DATA:
DIMENSIONS:
Height
Depth
Width
Depth with door open cm
cm
cm
cm
with working top
85
60
60
120
without working top
82
57,3
59,8
117
A "ON/OFF" button
B "PROGRAMME SELECTION" button
C "START"/"RESET" button
(start/cancelling programme)
D "EXPRESS" button
E "ALL in 1" option button
F "DELAY START" button
G "PROGRAMME SELECTION" lights
H "EXPRESS" button light
I "SALT EMPTY" light
L "OPTION SELECTION" light
M "PROGRAMME STATUS" lights/
"DELAY START" time lights
A B C D E F
H I M L G