Candy CC2 17-80 - Manual (Page 15)

Refer to the Drying guide table or the fabric
labels to select the most suitable programme.
●
Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.
● If drying delicate items press the Acrylics
Synthetics button to reduce the heat level.
Press again on completion, to select high
temperature.
HIGH heat setting
LOW heat setting
● Turn the 'DRYING TIME' Selector until the
required drying time aligns with the dial.
● The programme provides a conditioning
and anti-crease function. The dryer will heat
the load for 8 minutes followed by a
2 minute cool down period and is especially
good for garments which may have been
left for some time prior to ironing, in a linen
basket for example. Garments may also
become stiffened when dried outside on a
washing line or inside on radiators. This
process relaxes the creases in the fabric
making ironing quicker and easier.
● Gently close the door pushing it slowly until
you hear the door 'click' shut.
● Press the Start button. The indicator will
light and the drying cycle begins.
● The load is dried by tumbling in
thermostatically controlled warm air. Cool
air is used for the last 15 minutes to
reduce creasing and cool the load ready for
handling.
● When the program is fully completed the
drum will stop rotating and the dial will
point to 0.
● Open the door and remove the load.
● Clean the filter and empty the water
container after every drying cycle to ensure
maximum dryer efficiency.
● Clean the condenser after approximately
every 10 drying cycles to ensure maximum
dryer efficiency.
15
Operation
WARNING!
The drum, door
and load may be
very hot.
40003894Eng.qxd 22/09/2005 11:29 Page 15