Operation – Candy GO DV18 - 12S User Manual

Page 13

Advertising
background image

Refer to the Drying guide table or the fabric
labels to select the most suitable programme.

Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.

If drying delicate items press the button
to reduce the heat level. Press again on
completion, to select high temperature.

HIGH heat setting
LOW heat setting

Turn the 'DRYING TIME' Selector until the
required drying time aligns with the dial.

The programme provides a conditioning
and anti-crease function. The dryer will heat
the load for 8 minutes followed by a 2
minute cool down period and is especially
good for garments which may have been
left for some time prior to ironing, in a linen
basket for example. Garments may also
become stiffened when dried outside on a
washing line or inside on radiators. This
process relaxes the creases in the fabric
making ironing quicker and easier.

Gently close the door pushing it slowly until
you hear the door 'click' shut.

Press the button. The indicator will light
and the drying cycle begins.

The load is dried by tumbling in
thermostatically controlled warm air. Cool
air is used for the last 15 minutes to
reduce creasing and cool the load ready for
handling.

When the program is fully completed the
drum will stop rotating and the dial will
point to 0.

Open the door and remove the load.

Clean the filter after every drying cycle to
ensure maximum dryer efficiency.

13

Operation

WARNING!

The drum, door

and load may be

very hot.

40004920ENG.qxd 26/04/2007 09:10 Page 13

Advertising