Bosch FPP-5000 External Power Supply Unit Kit 24 V - Manual (Page 11)

UPS 2416 A en | 11
F.01U.003.349 | 6.0 | 2009.03 Bosch Sicherheitssysteme GmbH
Functional description
The UPS 2416 A in plug-in design with rack and panel
connector is a universal single output power supply
unit for the FPA fire detection system.
-
The module is protected against overvoltage and
reverse polarity.
- The output voltage is externally monitored and
regulated.
- The green onboard LED indicates the power supply
is working (DC output).
- In the case of a mains failure or failure of the DC
output voltage, the output at terminal FAULT (Pos.6)
drops to 0 V.
Pos. Marking Connection
1 ACL
AC Mains supply
2 ACN
3 Protective ground
4 DC+ 26 V DC . . . 29 V DC Output plus
5 DC- 0 V DC Output minus
6 FAULT Power fault
7 RTH+ Temperature sensor plus
8 RTH- Temperature sensor minus
Use the power supply unit only in the
purpose-designed
power supply
brackets and a fire enclosure (e.g. panel
housing)!
Technical specification
Input voltage (min - max) 100 V AC . . . 240 V AC (min - max)
Input frequency 50 Hz . . . 60 Hz
Current consumption 1.95 A max.
Efficiency factor > 85 %
Hold up time > 16 ms at 115 V AC
Output voltage 26 V DC . . . 29 V DC
Maximum load 6 A
Continious output power 160 W
Cooling Convection without fan
Protection class as per IEC 60950 / EN 60950 I
Permissible operating temperature -5 _C . . . 50 _C (23 _F . . . 122 _F)
Permissible storage temperature -20 _C . . . 60 _C (-4 _F . . . 140 _F)
Permissible relative humidity max. 95% non condensing
Housing material Aluminium, anodized
Housing color Semi gloss black
Dimensions (H x W x D) approx. 200 x 100 x 40 mm
Weight approx. 780 g
1 2 3 4 5 6 7 8
LED
1 8