ARIETE Multivapori XL 4214 - Manual (Page 29)

WAIT A FEW MINUTES BEFORE ADDING FRESH WATER TO THE
BOILER.
e) refill with water, adding it slowly at first to avoid puffs of steam. To refill, use
the funnel supplied.
f) screw the safety cap on again tightly;
g) plug the power supply cable in again;
h) press the ON/OFF switch.
CLEANING AND MAINTENANCE
Unplug the appliance before performing any operation. Before storing or cleancc
ing the appliance, allow it to cool down. To keep the appliance in full working
order for many years, simply rinse out the boiler once a month with water in
order to remove the limescale deposits. Do not use vinegar or other decalcicc
fiers.
AFTER USE
After steam cleaning, switch off the boiler
and expel any remaining steam by pressing
the button.
It is advisable to wait for at least an hour
before opening the boiler and emptying it
carefully. Rewind the power supply cable
onto its cable winder.
Wind the flexible tube hose around the
cleaner body and place the pistol onto the
handle provided after setting the safety
slider back to the lock position ( ).
It is recommended that the reservoir be
emptied if the appliance is not to be used
for some time.
28
EN