Bodum BISTRO Стационарный электрический миксер - Manual (Page 8)

INSTRUCTION FOR USE
7
FIGURE D
–
Place the bowl (2) on the base (7), press it down and lock
it in place by turning it in a clockwise direction.
– Press the release lever for the mixing arm (6) and lower
the mixing arm (11) slowly.
– The stand mixer can be used once the plug is inserted into
the power socket and the ON/OFF switch (5) is turned to ON.
REMOVING THE INDIVIDUAL ATTACHMENTS
– Before removing the mixing attachments (8, 9, 10), splash
guard with filler opening (11) or bowl (2), please ensure
that the speed control (4) is set to stop, that the ON/OFF
switch (5) is turned to OFF and that the plug has been
removed from the power socket.
– In order to remove the bowl (2) you must first press the
release lever for the mixing arm (6), raise the mixing arm (1)
and release the bowl (2) from the stand mixer by turning
it in an anti-clockwise direction.
– In order to remove a mixing attachment (8, 9, 10) you
must first press the release lever for the mixing arm (6),
raise the mixing arm (1) and release the mixing attach-
ment (8, 9. 10) from the stand mixer by turning it in an
anti-clockwise direction.
– In order to remove the splash guard with filler opening
(11) you must first press the release lever for the mixing
arm (6), raise the mixing arm (1) and release the bowl
splash guard with filler opening (11) from the stand mixer
by turning it in an anti-clockwise direction.
HOW TO USE THE SPLASH GUARD
WITH FILLER OPENING
– After attaching the splash guard with filler opening (11)
as described in «HOW TO USE YOUR STAND MIXER» it will
protect worktops and the stand mixer against spattering.
You can also use the filler opening to add ingredients to
the bowl (2).
CONNECTING THE POWER SUPPLY
– The mixing attachments (8, 9, 10) must always be fitted
before connecting the stand mixer to the power supply.
– Before connecting the stand mixer to the power supply,
please ensure that the speed control (4) is set to stop and
that the ON/OFF switch (5) is turned off.
– Before operating the stand mixer the mixing arm (1) must
have been closed and clicked into position. The stand
mixer has a safety feature which ensures that the stand
mixer cannot start while the mixing arm is raised.