Acclaim Lighting TC 1 - Manual (Page 3)

OPERATION GUIDE
Connect the device to a proper power outlet and poweron this unit, then the TC-1 is ready for use.
1. Power button
Tap the Power button to turn on the output while this unit is in standby status, the output
will change to the desired value gradually as per the fadetime set.
Tap the Power button to turn off the output while this unit is on, the output will change
to zero gradually as per the fadetime set.
Keep pressing the Power Button for 10s, this will allow users to change the way to power
ON/OFF this unit. Users can make it instant effort or 5s delay, when user select the instant
effort, the device will response promptly(ON/OFF) when user tap the power button,
while it will be effective after 5s when user select the 5s delay.
2. Fadetime Button
Tap the F button, the corresponding indicator will light up, indicating that this device is
engaged in fadetime adjusting mode,users are allowed to set the fadetime via the fader
within the range of 0.01s to 10s.
Tap the D button, the Dimmer indicator will light up, indicating that this unit is engaged in
Dimmer adjusting mode,
Tap the fader upwards and downwards to set the Dimmer value within the range of 0%-100%.
-2-