Accusys ACS-76130 - Manual (Page 9)

Chapter 1 – Introduction
Familiarizing yourself with the controller
Overview
The RAID box has three drive carriers, accessed from the front.
The sides of the box each feature a guide rail channel and mounting screw holes to enable
the box to be secured inside a computer case.
The connectors and jumpers are located on the rear panel.
 Front / Drive carriers
 Guide rail channel
 Holes for mounting screws
 Rear / Connectors & jumpers
Front view
 Three Drive Carriers
 Disk Activity Indicators
 Drive Carrier Lock
Each drive carrier can hold a one-inch high 3.5-inch form factor SATA disk drive. This makes it
easy to hot swap a drive in the event of a failure, without affecting the status of the remaining
drives.
 Drive Carrier Lock – Unlocked
orientation
 Drive Carrier Lock – Locked
orientation
 Green Disk Activity Indicator
 Amber Disk Activity Indicator
 Red Disk Activity Indicator