Remington BHT300 - Manual (Page 5)

ENGLISH
3
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
PL
HU
N
RU
TR
RO
GR
SL
AE
HR/ SRB
GB
AFTER EACH USE
Turn Trimmer off.
Remove the guide comb. (Diagram C)
Remove the blade and trimmer assembly by placing your fingers either side of the assembly
and pulling upwards. (Diagram D)
Gently shake the blade and trimmer assembly to remove the hair. Brush/rinse the trimmers
and shaver housing.
Replace the blade and trimmer assembly.
NOTE: Never use the cleaning brush on the foil as damage may occur.
CLEANING CAUTIONS
Cleaning should only be done with a soft brush, such as the brush supplied with the
product. The trimmer head can also be rinsed under water.
Do not use harsh or corrosive cleaners on the units or their cutters.
Do not apply pressure or hard objects to cutters.
Do not disassemble cutter assembly.
Do not submerge in water as damage will occur.
Suitable for cleaning under water.
STORAGE
Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
Do not wrap the cord of the charging adaptor around the appliance.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the
080760_REM_IFU_BHT300_22L.indd GB_3 080760_REM_IFU_BHT300_22L.indd GB_3 31.10.2008 18:07:25 Uhr 31.10.2008 18:07:25 Uhr