Remington HC5810 - Manual (Page 6)

ENGLISH
4
CARE FOR YOUR HAIRCLIPPER
Your clipper is fitted with high quality blades.
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
Always keep the attachement guide comp on the trimmer blade.
AFTER EACH USE
Ensure the clipper is switched off and disconnected from the mains.
Brush the accumulated hair from the blades. Do not submerge the clipper in water.
To clean the unit, wipe with a damp cloth and dry immediately.
Gently brush the remaining hairs away from the trimmer comp and trimmer blade.
Do not rinse the cutter assembly under water.
Note: Ensure that the clipper is turndes off when cleaning.
EVERY SIX MONTHS
At regular intervals the Blade Set should be removed and cleaned.
Ensure that the clipper is empty of all power, is switched off and disconnected from the
mains.
Hold the clipper in one hand so that the blades are at the top. Place your thumb
underneath the blades and press upwards. The blade set will detach from the clipper.
Brush the accumulated hair from the hair pocket and blades.
Replace the blade set by inserting the hook into the bottom of the hair pocket and pushing
down until you hear an audible ‘click’.
CAUTION
Do not use liquid cleaners on the blades or harsh or corrosive chemicals on the blade
casing. Always use a soft brush to remove the accumulated hairs.
Unplug the charge adaptor from the power outlet when fitting or removing attachments,
or while cleaning the product.
Always store this appliance and cord in a moisture-free area.
Do not wrap the cord of the charging adaptor around the appliance.
100166_REM_IFU_HC5810_21L.indd GB4 26.03.10 16:35