Remington R91 - Manual (Page 6)

4
ENGLISH
CLEANING DAILY
Ensure the shaver is switched off and unplugged
from the mains outlet.
Clean the top of the shaver first. Use the brush
supplied. (DIAGRAM D)
Pull the head and remove the shaving unit from
the shaver. (DIAGRAM E)
Use the brush to clean the inside of the shaving
unit carefully. (DIAGRAM F)
Clean the hair pocket carefully with the brush.
(DIAGRAM G)
Place the shaving unit back onto the shaver.
CLEANING WEEKLY
Ensure the shaver is switched off and unplugged
from the mains outlet.
Pull the head and remove the shaving unit from
the shaver. (DIAGRAM E)
Turn the switch on the frame to the left and lift
the frame out of the shaving unit. (DIAGRAM H)
Take the 2 shaving heads (cutters & guards)
carefully out of the shaving unit.
Clean the cutters and guards with the supplied
brush. (DIAGRAM I & J)
Place the shaving heads back into the shaving
unit.
Note: Please do not mix up the cutters and
guards. If you mix them up it may take weeks
until the optimal shaver performance is restored.
W
B
O
080718_REM_IFU_R91_22L.indd GB4 05.11.2008 14:07:30 Uhr