Sony SLV-SE100K - Manual (Page 8)

8
Connecting the VCR
Step 3 : Connecting the VCR
If your TV has a Scart (EURO-AV) connector, see page 9.
If your TV does not have a Scart (EURO-AV) connector
Note
• When you connect the VCR and your TV only with an aerial cable, you have to tune your TV
to the VCR (see page 11).
1 Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2 Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
3 Connect the mains lead to the mains.
Mains lead
AERIAL IN
to mains
Aerial cable (supplied)
AERIAL OUT
: Signal flow
AERIAL IN
ARIAL
ANTNN
IN
NTR
OUT
SORTI
ARIAL
ANTNN
IN
NTR
OUT
SORTI