Acnodes PCH 7791 - Manual (Page 49)

PCH 7791
17 inch Atom Fanless Panel PC
© Copyright 2012 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Ave.
Chino, CA91710
Tel:909.597.7588, Fax:909.597.1939
O nboard Serial Port 1/2/3/4
These four selection fields a llow you to s elect the I/O address and corresponding interrupts fo r
s erial port COM1/2/3/4. Options are: Disabled, 3F8/IR Q4, 2F8/IRQ3, 3E8/IRQ4 and 2E8/IRQ3.
O nboard Serial Port 5/6
Thes e two selec tion fields allow you to s elect the I/O address and c orresponding interrupts for serial
p ort C OM5/6. Options are: D isabled, 4F8/IRQ4 and 4E8/IRQ 3.
U AR T Mode Select
Gen erally, Onboard Serial Port 2 of motherboard can also be used as infrared port. This item
a llows y ou to determine whether Onboard Serial Port 2 is used as normal serial port or infra red port.
Four options are available:
Normal (used as serial port)
IrDA (used as standard infrared port)
ASKIR (used as res ponder inf rared port)
U R2 D uplex Mode
This item will be set to Half Duplex (Half) mode unless your infrared device supp orts Full Duplex
(Full) mode.
Power On By PS/2 K eyboard
Three options are available:
D isabled
Any key
Keyboard 98
Watch D og Time r Select
Eight options are ava ilable: D is abled, 10Sec, 20Sec, 30Sec , 40Sec, 1Min, 2Min and 4Min