Acnodes KDI 8198 - Manual (Page 29)

User Manual
12. Start Up
KVM Settings Session
1. OSD
●
OSD Menu on screen time
default is 10 seconds.
●
It can be modified from 05 – 99
seconds.
2. Scan
●
Scan interval from one PC port
to next PC port when applying
auto scan, its default is 10
seconds.
●
It can be modified to 99
seconds for maximum.
3. Change Password
●
Default password “00000000”
8 zeros
●
Choose “Change Password” in
KVM Setting Session.
●
Key-in the existing password.
●
Enter the New Password.
●
Re-Enter the New Password.
●
Changing Password complete.
●
The steps are shown as next
picture:
4. Console On/OFF
●
ON – any user can use the
console
●
OFF – user is not allowed to
use the console port, unless
password is entered.
●
Default – OFF, you need to
key-in password.
5. Escape
●
When the following screen is
appeared, you can press
”ESC” key to escape.
ENTER PASSWORD : █
ESC : QUIT ENTER :
ENTER NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD : █
ESC : QUIT ENTER :
COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT ENTER :
COMPLETE
102 ?SYSTEM 02
Rev. : 1.0 P.28