Acnodes FPC 7915 - Manual (Page 89)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC7915
15-inch touch Panel PC
Atom N270 fan less all-in-one system
4-12. PASSWORD SETTING
User is allowed to set either supervisor or user password, or both of them. The difference is that the super-
visor password can enter and change the options of the setup menus while the user password can enter
only but do not have the authority to change the options of the setup menus.
TO SET A PASSWORD
When you select this function, the following message will appear at the center of the screen to assist you in
creating a password.
Type the password up to eight characters in length, and press < Enter >. The password typed now will clear
any previously entered password from CMOS memory. You will be asked to confirm the password. Type the
password again and press the < Enter > key. You may also press < Esc > to abort the selection and not
enter a password.
User should bear in mind that when a password is set, you will be asked to enter the password everything
you enter CMOS setup Menu.
TO DISABLE THE PASSWORD
To disable the password, select this function (do not enter any key when you are prompt to enter a pass-
word), and press the <Enter> key and a message will appear at the center of the screen:
Press the < Enter > key again and the password will be disabled. Once the password is disabled, you can
enter Setup freely.